- Stock: In Stock
- Model: Sika Mono top 4012
It is a one-part, fibre-reinforced, low-shrinkage concrete repair mortar that turns damaged, weak or corroded reinforced concrete back into a strong, load-bearing surface — and all you add is clean water. Rated Class R4 (the highest structural class under EN 1504-3), it's the same professional-grade mortar engineers specify for bridges, dams and water tanks, now available over the counter at Shabbiri Hardware, Ongata Rongai & Tuala.
Why Contractors in Kenya Choose Sika MonoTop-4012
- Serious strength: reaches roughly 56 MPa compressive strength in 28 days — stronger than most structural concrete.
- Fibre-reinforced & low-shrinkage: resists cracking and stops the repair from lifting off the surface.
- One-part convenience: just add water — perfect for site crews and DIY structural repairs alike.
- Built to last: sulphate-resistant and armoured against water, chloride and carbonation — ideal for marine, sewage and water-retaining structures.
- Deep repairs in fewer passes: build up to 120 mm thick in a single horizontal application.
- Non-combustible: EuroClass A1 fire rating for total peace of mind.
- Greener build: made with recycled materials and low embodied carbon.
Where You'll Use It
Sika MonoTop-4012 is a true all-rounder for reinforced concrete repair and reprofiling, indoors and out, above and below ground:
- Repairing spalled, cracked or weathered columns, beams, slabs and walls
- Restoring concrete cover over rusted, exposed steel reinforcement
- Structural strengthening and reprofiling of damaged concrete
- Water tanks, dams, sewage-treatment works and marine structures
- Repairs to buildings, bridges and civil-engineering structures
Technical Specifications at a Glance
| Type | One-part, fibre-reinforced, low-shrinkage cementitious repair mortar |
| Classification | Class R4 structural — CE marked to EN 1504-3 |
| Pack size | 25 kg bag (grey powder) |
| Mixing water | 3.75 – 3.9 litres of clean water per 25 kg bag |
| Yield | ~13.7 litres of mortar per bag (~2.1 kg per m² per mm) |
| Working time (pot life) | ~60 minutes at +20 °C |
| Layer thickness | 6 mm to 120 mm (horizontal); 6–85 mm (vertical) |
| Compressive strength | ~19 MPa (1 day) · ~43 MPa (7 days) · ~56 MPa (28 days) |
| Bond / adhesion strength | ≥ 2.0 MPa (EN 1542) |
| Application temperature | +5 °C to +30 °C |
| Shelf life | 12 months in original sealed bag, stored dry |
How to Use It — 5 Simple Steps
- Prepare: Break out all loose, weak or damaged concrete and clean exposed steel to bright metal.
- Pre-wet: Soak the concrete with clean water for at least 2 hours so it's damp but not shiny (saturated surface dry).
- Mix: Add the powder to 3.75–3.9 L of clean water and mix for 3 minutes to a smooth, lump-free mortar.
- Apply: Work in a thin scratch coat, then build up wet-on-wet by hand or spray to the thickness you need.
- Cure: Protect from sun and wind and keep the repair damp while it cures for maximum strength.
Buy
Sika MonoTop-4012 25kg in Kenya — Shabbiri Hardware
Shabbiri Hardware is
your trusted supplier of genuine Sika building chemicals and concrete repair
products in Ongata Rongai and Tuala. Get expert advice on the right primer,
repair mortar and application method for your project — plus fair pricing and
quick service.
Branch 1: Magadi Road,
Ongata Rongai
Branch 2: Tuala, past Nazarene University
Call / WhatsApp: 0741 042484 · 0745 554008
Website: www.shabbirihardware.co.ke
Email: info@shabbirihardware.co.ke
Call or WhatsApp today to confirm stock & price, or to order
for pickup or delivery.
Order on What's App