Fiber Cement Teak / Cassia Cladding Planks 8mm × 150mm × 3000mm In Kenya

The Fiber Cement Teak / Cassia Cladding Planks 8mm × 150mm × 3000mm are decorative paintable planks designed for interior wall cladding, ceiling decoration, partitions and feature walls. Their long 3000mm length creates a neat plank-style finish, while the uncoloured surface allows painting, staining or polishing to match any interior design. Available at Shabbiri Hardware in Ongata Rongai and Tuala, with delivery across Kenya.

Uses

Interior Wall Cladding:
Used to create decorative wall finishes in homes, offices, shops and commercial interiors.

Feature Walls:
Perfect for TV walls, reception walls, hotel lobby walls, office walls, corridors and showroom displays.

Ceiling Decoration:
Can be used on ceilings to create a clean linear plank design.

Partition Finishing:
Suitable for finishing interior partitions with a decorative plank-style look.

Renovation Projects:
Good for upgrading plain or old walls with a modern decorative cladding finish.

Commercial Interiors:
Suitable for hotels, restaurants, salons, boutiques, offices, schools, clinics and retail shops.

Benefits

Decorative Plank Design:
Creates a modern cladded look for walls and ceilings.

Long 3000mm Length:
Helps create a continuous finish with fewer horizontal joints.

150mm Width:
Gives a neat and balanced cladding pattern.

8mm Thickness:
Provides a practical balance between easy handling and stable interior finishing.

Uncoloured / Paintable Finish:
Can be painted, stained or finished to match the customer’s design preference.

Suitable for Teak / Cassia Style Finishes:
Can be finished in natural wood-look tones such as teak, cassia, brown, walnut or custom paint colours.

Easy to Install:
Can be cut, fixed and finished using standard carpentry or wall cladding tools.

Modern Interior Finish:
Ideal for creating stylish, clean and attractive wall or ceiling designs.

Technical Specifications

Coverage calculation:
1 plank = 0.15m × 3.0m = 0.45m²

How to Use / Installation Guide

1. Measure the Area
Measure the total wall or ceiling area where the cladding planks will be installed.

Formula:
Total area ÷ 0.45m² = number of planks required

Add 5–10% extra for cutting, wastage, corners and fitting around windows, doors or edges.

2. Prepare the Surface
Ensure the wall or ceiling surface is dry, clean, level and firm. Remove dust, loose paint, oil or weak plaster before installation.

3. Plan the Layout
Decide whether the planks will run vertically, horizontally or diagonally. Vertical installation can make walls look taller, while horizontal installation can make the space look wider.

4. Mark the Fixing Lines
Use a level line and pencil to mark where the planks will be fixed. Proper marking helps keep the cladding straight and professional.

5. Cut the Planks to Size
Measure and cut the planks according to the wall or ceiling layout. Use suitable cutting tools to achieve clean edges.

6. Apply Adhesive or Fixing Method
Apply suitable construction adhesive to the back of the plank, or fix using screws/nails depending on the surface and installer’s method. For uneven walls, a timber or metal support frame may be required.

7. Fix the Planks
Press each plank firmly into position. Keep the spacing and alignment consistent for a neat finish.

8. Finish Edges and Corners
Use trims, mouldings or finishing strips on corners, edges and joints where needed.

9. Sand and Prime
Lightly sand rough edges and apply primer if painting is required.

10. Paint, Stain or Polish
Finish the planks with your preferred paint, stain, polish or decorative coating. Since they are uncoloured, you can match them with your interior theme.

11. Final Inspection
Check that all planks are firmly fixed, lines are straight, corners are neat and the surface is clean.

Important Installation Tips

Do not install on wet, weak or dusty surfaces.

Plan the plank direction before cutting.

Use a level line to keep the planks straight.

Use a support frame if the wall or ceiling is uneven.

Leave small movement allowance where necessary.

Apply primer before painting for a better finish.

Use an experienced fundi for a neat professional finish.

Maintenance

Wipe dust using a soft dry cloth.

Avoid direct water exposure or continuous moisture.

Repaint, restain or repolish when necessary.

Inspect joints, edges and fixing points periodically.

Clean gently to protect the finish.

Repair damaged planks early to maintain a neat look.

Store & Delivery Info

Main Branch: Magadi Road, Ongata Rongai, Nairobi
Tuala Branch: Past Nazarene University, Tuala

Call/WhatsApp: 0745 554008 / 0741 042484
Email: info@shabbirihardware.com

Countrywide Deliveries Available:
Nairobi, Mombasa, Kisumu, Nakuru, Eldoret, Thika, Naivasha, Kakamega, Bungoma, Kericho, Kitale, Machakos, Meru, Embu, Isiolo, Nanyuki, Malindi, Voi, Garissa and more.