JADEVER 1HP Sewage Submersible Pump 750W – 2 Inch Outlet, 13m Head | Dirty Water Pump Kenya

The JADEVER 1HP Sewage Submersible Pump 750W is a heavy-duty dirty water pump designed for sewage water, wastewater, flood drainage, septic water transfer, and construction site dewatering. It features a 2-inch outlet, 13m head, 300L/min flow rate, copper wire motor, stainless pump body, and cast iron motor body.

Key Features

• 750W / 1.0HP powerful motor for reliable dirty water pumping
• Maximum head: 13m for efficient water lifting
• Maximum flow: 300L/min for fast water transfer
• 2-inch outlet size for high-volume drainage
• Copper wire motor for stronger performance and durability
• Stainless pump body for corrosion resistance
• Cast iron motor body for heavy-duty strength
• 9m cable length for easier use on site
• Designed for dirty water and sewage water applications
• Ideal for domestic, commercial, construction, and drainage use

Technical Specifications

Recommended Uses

The JADEVER 1HP Sewage Submersible Pump 750W is suitable for:

• Septic tank water transfer
• Dirty water drainage
• Construction site dewatering
• Flooded area drainage
• Wastewater movement
• Basement and sump drainage
• Farm drainage applications
• Commercial building drainage
• Drainage from pits, trenches, and water collection areas

How to Use

1. Connect a suitable 2-inch delivery pipe or hose to the pump outlet.
2. Place the pump inside the dirty water or wastewater area before switching it on.
3. Make sure the pump is fully or properly submerged before operation.
4. Connect to a safe 220–240V power supply.
5. Switch on the pump and allow it to start discharging water through the pipe.
6. Do not allow the pump to run dry, as this can damage the motor.
7. Avoid pumping chemicals, petrol, diesel, flammable liquids, or highly corrosive liquids.
8. After use, switch off the power before removing the pump from water.
9. Clean the pump inlet after use, especially when used in muddy or dirty water.

Safety & Maintenance Tips

• Always use the pump with the correct voltage supply.
• Do not touch the pump or cable with wet hands while connected to power.
• Keep electrical connections away from water.
• Do not run the pump without water.
• Clean the inlet regularly to prevent blockage.
• Avoid using the pump for large stones, plastics, rags, ropes, or hard solids.
• Store the pump in a dry place after use.
• For long service life, rinse the pump with clean water after pumping dirty water.

Call to Action

Get the JADEVER 1HP Sewage Submersible Pump 750W today from Shabbiri Hardware Kenya.

Available at: Ongata Rongai & Tuala
 Call / WhatsApp: 0741 042484 / 0745 554008
Website: shabbirihardware.com