Black Construction Safety Net 50M x 3M | Building Site Screening, Dust Control & Privacy Net in Nairobi Kenya

Technical Specifications

Area Coverage Calculation

Length: 50 metres
Width: 3 metres

Coverage = 50m x 3m = 150m²

So, 1 roll covers approximately 150 square metres before allowance for overlapping, tying, cutting and site wastage.

For better installation, always allow extra material for edges, overlaps and fixing points.

The Black Construction Safety Net 50M x 3M is a durable protective net used on construction sites, scaffolding, high-rise buildings, renovation projects and building perimeters. It helps improve site safety by reducing the risk of falling debris, protecting workers, pedestrians and nearby property.

Its black colour gives a clean, professional look on-site and is suitable for construction areas where a strong and neat safety covering is required.

Available at Shabbiri Hardware Kenya – Ongata Rongai and Tuala

Main Uses of Black Construction Safety Net

1. Scaffolding Protection

Used around scaffolding to reduce falling debris and improve construction site safety.

2. Building Perimeter Safety

Can be fixed around high-rise buildings, open sides and renovation areas.

3. Debris Control

Helps prevent small materials, dust and debris from falling or spreading outside the work area.

4. Worker & Pedestrian Protection

Creates a safer boundary between the construction area and nearby walkways or neighbouring property.

5. Site Privacy & Organization

The black colour gives the site a neat appearance and helps screen off active construction work.

Benefits

• Covers a large area of 150m² per roll
• Helps reduce falling debris risk
• Suitable for scaffolding and construction sites
• Lightweight and easy to install
• Can be cut according to site measurements
• Black colour gives a clean professional look
• Suitable for temporary and semi-permanent site protection
• Allows airflow while providing coverage
• Helps improve safety around active construction areas

Installation Process

Step 1: Measure the Site Area

Measure the scaffolding, building side, balcony, warehouse opening or construction area to be covered.

Step 2: Cut the Safety Net

Cut the net according to the required size. Leave extra allowance for tying and overlapping.

Step 3: Prepare Fixing Points

Use scaffolding pipes, steel frames, support wires, timber supports or building edges as fixing points.

Step 4: Fix One Side First

Start by securing one side of the net using cable ties, ropes, clips or wires.

Step 5: Stretch the Net Gently

Pull the net across the area. Do not overstretch it because this may weaken the mesh.

Step 6: Secure All Edges

Tie all edges firmly to prevent the net from sagging or being lifted by wind.

Step 7: Overlap Where Necessary

When joining two pieces, overlap them properly and tie the joint securely.

Step 8: Inspect Regularly

Check the net during the project to ensure it remains firm, especially after wind, rain or heavy site activity.

Installation Tips

• Use strong cable ties or ropes for scaffolding installation.
• Do not leave open gaps at the sides or bottom.
• For high-rise use, ensure fixing is done by qualified site personnel.
• Allow extra net for overlaps and secure finishing.
• Inspect the net regularly for tears, loose ties or damaged areas.
• Replace damaged sections immediately for better site safety.