Akfix D3 PVAc White Glue 30Kg is a professional, ready-to-use wood adhesive built on a polyvinyl acetate (PVAc) homopolymer emulsion and certified to Durability Class D3 under DIN EN 204. Straight from the pail, it delivers the fast grab and the water-resistant glue line that Kenyan furniture workshops, joinery shops and construction carpenters need — with no mixing, no hardener and no solvent smell.
This is the 30 kg bulk bucket (Akfix stock code AP330) — the size that keeps a production workshop running. Buying in bulk cuts the cost per kilogram sharply against 500 g and 1 kg bottles, and it means your team stops losing half a day chasing glue mid-job.
| Attribute | Detail |
|---|---|
| Product name | Akfix D3 PVAc White Glue |
| Brand | Akfix (AKKIM Construction Chemicals) |
| Country of manufacture | Türkiye |
| Stock code (30 kg) | AP330 |
| Pack size | 30 kg pail — also available 150 g, 500 g, 1 kg, 3 kg, 10 kg |
| Units per carton | 1 pail |
| Product type | One-component, ready-to-use wood adhesive |
| Category | Adhesives & Sealants → Wood Glue → PVAc |
Wood moisture content must be 8–12 %. Too wet and the joint never reaches full strength; bone-dry timber over-absorbs the adhesive and starves the glue line. Surfaces must be clean, dust-free, oil-free, wax-free and freshly machined — timber that was planed days ago and left standing bonds measurably weaker. Mating faces must fit closely: D3 is an adhesive, not a gap filler.
A 30 kg pail settles during storage. Stir with a paddle mixer or a clean stick until completely uniform before every session. Do not add water — dilution drops the 54 % solids content and destroys the D3 water-resistance rating you paid for. Do not mix with other adhesives.
Adhesive, timber and workshop must all be above +5 °C, ideally 15–25 °C. Applying to cold material produces a chalky, powdery, weak glue line that will fail later.
Lay an even film with a mechanical glue spreader, hand roller, brush or air-activated glue gun. Target 70–130 g/m²:
One-sided application is enough for close-fitting joints. Coat both faces for porous boards, large panels, or when assembly will be slow. Assemble before the film skins over — film formation starts from about 10 minutes at 20 °C, and much faster in hot, dry or windy conditions. Squeeze-out along the joint is the sign you applied enough.
Bring the parts together and apply pressure immediately. Use 9–12 kg/cm² glue-line pressure on hardwoods. Pressure must be even across the whole joint — use enough clamps, cauls or a proper press platen. Uneven pressure leaves alternating starved and squeezed-out zones, which is the single most common cause of joint failure.
Hold under pressure for the full press time from section 4.3 — 30 minutes at 20 °C for wood-to-wood, less in a heated press. Extend it in cold weather or with dense hardwoods.
Wipe squeeze-out immediately with a damp cloth. Once cured, it must be removed mechanically with a scraper or chisel. Wash spreaders, rollers, brushes and the glue gun with water before the adhesive sets — dried PVAc destroys equipment. Never sand wet glue: it smears into the grain and shows up as pale patches under stain and varnish.
After the press time the assembly can be handled, but do not machine, sand, load or stress the joint for at least 24 hours. Full water resistance develops after 7 days — keep the piece away from water within that window.
Reseal the pail tightly. Store between +5 °C and +25 °C, out of direct sunlight, off the floor and on a pallet. Protect from freezing. Rotate stock — oldest first — and observe the 12-month shelf life from production date.
Q: Is Akfix D3 PVAc White Glue waterproof? A: It is water-resistant, classified D3 to EN 204 — rated for interior use with frequent short-term exposure to running or condensed water and high humidity, and for sheltered exterior joinery such as window frames and external doors. Full water resistance develops 7 days after bonding. For permanently immersed or fully weather-exposed structural timber, a D4 adhesive is the correct specification.
Q: How long does Akfix D3 white glue take to dry? A: Press time is roughly 30 minutes at 20 °C for wood-to-wood joints, or as little as 4 minutes at 80 °C in a hot press. Leave the joint unstressed for 24 hours before machining or loading, and allow 7 days for full water resistance.
Q: What is the difference between D2, D3 and D4 wood glue? A: D2 — interior, dry conditions only. D3 — water-resistant; interior with frequent short-term moisture, plus sheltered exterior use. D4 — highest resistance, for timber exposed to weather or frequent water. D3 is the right, cost-effective choice for the vast majority of Kenyan furniture, cabinetry, door and joinery work.
Q: How much area does one 30 kg pail cover? A: At the specified 70–130 g/m², a 30 kg pail covers approximately 230–430 m² of glue line — around 300 m² at a typical 100 g/m².
Q: Can I use it on MDF, chipboard, plywood and blockboard? A: Yes. It bonds MDF, chipboard, blockboard, plywood, hardboard, softboard and synthetic resin board, plus laminates, veneers, paper, cardboard and textile-backed PVC cloth to wood. Use the higher spread rate on porous board edges.
Q: Can I add water to make it go further? A: No. Adding water is not recommended — it lowers the 54 % solids content and compromises the D3 water-resistance classification. Use it exactly as supplied, after thorough stirring.
Q: Is it safe to use indoors? A: Yes — it is water-based and solvent-free, so it is low-odour and suitable for enclosed workshops with normal ventilation. Wash skin contact off with water, avoid eye contact, and keep it out of reach of children.
Q: What is the shelf life and how should I store it? A: 12 months from the production date when unopened and stored between +5 °C and +25 °C. Keep it sealed, shaded, off the floor and away from frost.
Q: Do you sell smaller sizes? A: Yes — Akfix D3 is also available in 150 g, 500 g, 1 kg, 3 kg and 10 kg packs. The 30 kg pail gives the lowest cost per kilogram and is what most workshops buy.
Q: Where can I buy Akfix D3 PVAc White Glue 30Kg in Kenya? A: From Shabbiri Hardware — Magadi Road, Ongata Rongai, and our Tuala branch past Africa Nazarene University. Call 0741 042484 or 0745 554008, or email info@shabbirihardware.com. Trade and bulk pricing available for workshops and contractors.
Q: Do you deliver around Nairobi? A: Yes — we deliver across Ongata Rongai, Tuala, Kiserian, Ngong, Karen, Langata and greater Nairobi. Call to arrange delivery on bulk 30 kg orders.
Shabbiri Hardware keeps the Akfix D3 PVAc White Glue 30 kg pail in stock at both of our Magadi Road branches. Find us at Magadi Road, Ongata Rongai, or at our Tuala branch just past Africa Nazarene University.
We supply carpentry workshops, furniture makers, fundis, contractors and DIY builders across Ongata Rongai, Tuala, Kiserian, Ngong, Karen, Langata and greater Nairobi — with trade pricing on bulk and repeat orders, expert product advice, and delivery available on large orders.
Call /WhatsApp
0741 042484 · 0745 554008
Email: info@shabbirihardware.com
Website:www.shabbirihardware.com
Monday – Saturday, 8:oo am – 5:00pm
Call ahead to confirm bulk 30 kg stock and current pricing, or message us on WhatsApp for a quick quote.
Order on What's App